Go Back   Eastwood Shop Talk > Restoration, Customization, & Fabrication > Buffing/Metal Finishing

Reply
 
Thread Tools Display Modes
  #1  
Old 10-26-2009, 12:10 PM
JimSr JimSr is offline
Rust Bucket
 
Join Date: Oct 2009
Posts: 2
Red face Newbie question - Rouge

Years ago I bought the Stainless Buffing Kit. I (finally) needed to use it and could not figure out how to get the rouge out!! The metal bottom doesn't push up.... the plastic cap was on all these years. I have never seen a paste-type, only the "stick-type" that melts onto the buffing wheel. So how do I get it onto the buffing wheel? Dig it out??? Help!
Reply With Quote
  #2  
Old 10-26-2009, 02:19 PM
Nick C's Avatar
Nick C Nick C is online now
Eastwood Administrator
 
Join Date: Dec 2004
Location: Pottstown, PA
Posts: 413
Default

JimSr,

Welcome to the forum. The plastic cap pulls off and then you can tear away the cardboard to apply the rouge to your spinning buffing wheel.
Reply With Quote
  #3  
Old 10-26-2009, 02:47 PM
JimSr JimSr is offline
Rust Bucket
 
Join Date: Oct 2009
Posts: 2
Default

Many THANKS, Nick! Sounds like making Pillsbury biscuits! With the plastic cap, I thought it was meant to reseal the container. Thanks again!
JimSr
Reply With Quote
  #4  
Old 10-26-2009, 04:50 PM
Nick C's Avatar
Nick C Nick C is online now
Eastwood Administrator
 
Join Date: Dec 2004
Location: Pottstown, PA
Posts: 413
Default

Exacly like biscuits I usually store my rouge in a ziplock bag when not in use.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:08 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Copyright ©2009, The Eastwood Company